PRODUCT DATA SHEET
PTS-202_TDS_Rev. 01 12/18/2012
PTS-202 PAINT REMOVER
PTI PAINT REMOVER SERIES
DESCRIPTION
PTS-202 is a biodegradable peroxide based paint remover that is intended to remove the most resilient coatings
from metal and composite surfaces. This is a stable paint remover that will not corrode the metal. PTS-202 works
by breaking through the film of the paint and lifting the paint off in sheets instead of turning the paint to sludge.
This remover is easy and safe to use as well as clean up.
COLORS
This paint remover is available in Green.
COATING PROPERTIES & CHARACTERISTICS
SHELF LIFE
Shelf life is only applicable for materials stored in unopened and undamaged original factory filled containers.
1 year when stored between 50⁰-85⁰ Fahrenheit.
APPLICATION
For best results, apply the product with an airless spray gun. The tip size must be intended for high viscosity
coatings and hose size must be 3/8 ID. PTS-202 may also be poured or brushed on the surface. PTI recommends
spraying PTS-202 with an airless sprayer. The tip size must be intended for high viscosity liquids and the hose size
must be 3/8 ID. It is also acceptable to brush the product on.
.
Surface Preparation:
1. Before starting any cleaning or preparation it is important to review and follow the original equipment
manufacturers instructions regarding masking procedures.
2. All areas that are going to be masked should be clean with an approved cleaner, PTC-2002 (MIL-PRF-
85570D TY II), acetone, IPA or any other approved wash solvent.
3. The approved masking tape for this application is MIL-T-23397B TY II and should be applied with a
plastic applicator to ensure proper adhesion.
Commentaires sur ces manuels